Meet one of our new blog contributors - Trisha Weekes! Trisha blogs over at myfourtrees.com. She created this charming summertime pennant banner for our shop display and is sharing her tutorial with our blog readers!
Pennant Banner Tutorial
Finished length-3 yards/ 9' long
Supplies needed:
22- 5" charm squares or assorted fabrics cut into 5"
squares
1 package of 1/4" or 1/2" double fold bias tape (your
preference)
Other general tools needed:
Sewing machine, thread, rotary cutter, cutting mat, straight
pins, scissors, bone folder or turning tool.
Steps:
1-If not using precut charm squares, cut your assorted fabrics
into 5" squares, using rotary cutter and mat.
2-Take each 5" charm square, fold diagonally right
sides together, opposite corners, creating a triangle. Pin at corner, set aside
until all are folded and pinned; or transfer folded triangle to the sewing
machine and proceed with the next step.
3- Sew 1/8" seam allowance from pinned corner to folded
corner, back stitch at the beginning and end.
4- Trim folded tip at an angle, cut loose threads.
5- Open the seam, iron or finger press open. Center the seam
down the middle of triangle, creating a kite shape.
6- Turn inside out and with the bone folder push out the
point of the pennant.
7- Fold over and tuck in the flap at the top into the triangle
pocket, still centering the seam down the middle of the back. Pin and set aside
until all are pinned.
8- Arrange the pennants in the order you would like them
to appear, alternating prints into a repeating pattern. (This picture shows
them already chain stitched together.)
9- Using a 1/8" seam allowance, sew along the top of
pennant, closing the pocket. Chain stitch all the pennants together, leaving
1/2" -1" of thread in between pennants. Make sure each
back seam is facing down as you sew.
10- Open the double fold bias tape, leave 10-12" for
hanging ties at the beginning and end. Insert pennant, fold back over the bias
tape and pin each pennant in place, again making sure all the back seams are in
the back. The chain stitch should help you make the space between each pennant
more even, if not cut and pin as you desire.
11- Starting at the end of the bias tape, make a 1/4" seam
allowance down the length of the bias tape, making sure to enclose each pennant
into the bias tape.
12- Hang and enjoy!
